汉语
 
 
Search

Ci5000 Weather-Ometer

Atlas Ci5000氙灯老化箱采用水冷氙灯系统,是一种易于使用的实验室老化测试仪器，已获得汽车，涂料，塑料和纺织行业许多OEM的认可。

  • 概述 +



    Ci5000采用先进的数字控制系统，代表着在易于使用的实验室耐候老化测试仪器中应用数字和光学技术的巨大成就。Atlas Ci5000 得到了众多汽车、油漆与涂料以及塑料行业生产商的认可，被认为对产品服役寿命预期能够提供准确、可重现且可重复测试结果的专属平台。Ci5000获得了CE、UL、CSA、ISO和EN的标准认证。

  • 特点 +


    • 12000瓦水冷氙弧灯系统
    • 总暴露面积：11,000 cm2 (1,705 in2)
    • 3层转鼓型样品架
    • TFT全彩12寸触摸屏控制面板显示所有测试参数
    • 直接设定并控制辐照度：340纳米、420纳米、300-400纳米或Lux
    • 直接设定并控制黑板温度；不绝缘（BPT）或绝缘（BST）
    • 直接设定并控制相对湿度
    • 直接设定并控制样品箱内空气温度
    • 显示诊断信息
    • 14种工厂预置测试方法
    • 支持12个自定义程序的空间；亚循环性能
    • 多语言功能（英语、法语、德语、西班牙语、日语、汉语、韩语、土耳其语）
    • 通过以太网或USB接口输出数据。包含U盘
    • 内置Smart DamperTM，减少箱体温度和湿度的可变性，并补偿实验室环境条件的变化
    • SmartLight MonitorTM智能化灯光监测系统，验证是否安装了正确的光能监测点
    • 样品前部喷淋和背部喷淋
    • 滤镜组合各种</2091以满足所有测试方法
    • 进气管除尘过滤器
    • CS-7氙灯冷却系统
    • 水质监控及自动报警
    • 参照氙灯校准
    • 试验箱观察窗
    • 全球通用电器配置，适用于各种本地频率、电压和电气要求
    • 满足CE、UL、ISO EN与CSA安全要求
    • 以辐照量和时间为单位自动倒计时功能
    • 可容纳多种样品类型的样品夹可选
    • VibraSonicTMTM超声波加湿系统

    现在就联系我们联系我们，让我们帮助您从耐候老化测试和流程中获得最大效益。

  • 选项 +


    • 双黑板温度（BPT）和黑标温度（BST）测量/控制，包括BPT和BST传感器
    • 监测第二波长300-400 纳米、340 纳米、420 纳米或Lux
    • S3T特殊样品表面温度系统
    • WXView II数据采集系统-基于Web的应用程序，允许用户安全地访问连接到其公司网络的仪器，下载存档文件和其他功能
    • 配有定制样品架设计的高辐照度能力可选（Ci5000 HE）

  • 配件 +


    • XenoCal辐照度校准装置用于在样品同一位面独立进行辐照度校准及测量
    • 满足特殊的汽车内饰和纺织品测试要求的辅助滤镜灯罩
    • LiquiAirTM独立氙灯冷却系统（顶置式或壁挂式可选）
    • 箱腿延长（6个腿：提升15 厘米）
    • 可上锁的箱门闭锁机构

  • 标准 +


    列出的标准和规范可能包含几个备选的测试选项，该仪器在任何列出的标准中至少满足一个选项。标准如有变更，不另行通知。 这可能导致测试技术的改变。经常与负责的标准开发组织检查标准的修订状态。如果不确定仪器是否符合要求，请与当地销售代表联系。

    • AATCC TM16.3
      • Colorfastness to Light: Xenon-Arc
    • AATCC TM169
      • Weather Resistance of Textiles: Xenon Lamp Exposure
    • AATCC TM16E
      • Colorfastness to Light
    • ASTM C1257
      • Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
    • ASTM C1442
      • Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
    • ASTM C1501
      • Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
    • ASTM C1519
      • Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
    • ASTM C732
      • Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
    • ASTM C734
      • Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
    • ASTM C793
      • Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
    • ASTM D1148
      • Standard Test Method for Rubber Deterioration/Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
    • ASTM D1670
      • Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
    • ASTM D2565
      • Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
    • ASTM D3424
      • Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
    • ASTM D3451
      • Standard Guide for Testing Coating Powders and Powder Coatings
    • ASTM D4101
      • Standard Specification for Polypropylene Injection and Extrusion Materials
    • ASTM D4303
      • Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints
    • ASTM D4355
      • Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
    • ASTM D4434
      • Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
    • ASTM D4459
      • Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
    • ASTM D4637
      • Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane
    • ASTM D4798
      • Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
    • ASTM D4811
      • Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
    • ASTM D5010
      • Standard Guide for Testing Printing Inks and Related Materials
    • ASTM D5019
      • Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
    • ASTM D5071
      • Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
    • ASTM D5383
      • Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists
    • ASTM D5398
      • Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
    • ASTM D5819
      • Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
    • ASTM D6083
      • Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
    • ASTM D6551
      • Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
    • ASTM D6577
      • Standard Guide for Testing Industrial Protective Coatings
    • ASTM D6662
      • Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
    • ASTM D6695
      • Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    • ASTM D6878
      • Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
    • ASTM D750
      • Standard Test Method for Rubber Deterioration Using Artificial Weathering Apparatus
    • ASTM D7869
      • Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
    • ASTM D904
      • Standard Practice for Exposure of Adhesive Specimens to Artificial Light
    • ASTM F1164
      • Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
    • ASTM F1515
      • Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
    • ASTM F2366
      • Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon-Arc Light Apparatus
    • ASTM G151
      • Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    • ASTM G155
      • Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
    • FLTM BO 116-01
      • Resistance to interior weathering
    • GB/T 10485
      • Road vehicles- Lighting and light-signaling devices- Environmental endurance
    • GB/T 14522
      • Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products
    • GB/T 16259
      • Test method for accelerated weathering of building materials
    • GB/T 16422
      • Plastics -- Methods of exposure to laboratory light sources -Part 2: Xenon-arc lamps
    • GB/T 16991
      • Textiles--Test for color fastness--Color fastness and ageing to artificial light at high temperatures: Xenon-arc
    • GB/T 1865
      • Paints and varnishes--Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon- arc radiation
    • GB/T 18833
      • Retro-reflective sheeting for road traffic signs
    • GB/T 29061
      • Performance films for glass in buildings
    • GB/T 32088
      • Accelerated weathering test methods of automotive nonmetallic components and materials using a xenon-arc apparatus
    • GB/T 3511
      • Rubber, vulcanized- Test method for resistance to artificial weathering (xenon-arc)
    • GB/T 5137
      • Automotive safety glass test method
    • GB/T 6151
      • Textiles-Tests for color fastness-General principle of testing
    • GB/T 8427
      • Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test
    • GB/T 8430
      • Textiles - Tests for color fastness to artificial weathering - Xenon-arc fading lamp test
    • GM 9125P
      • Procedures for Laboratory Accelerated Exposure of Automotive Materials
    • GME 60292
      • Designation of Colour Fastness and Resistance to Artificial Light
    • GMW 14162
      • Colorfastness to Artificial Weathering
    • GMW 14170
      • Coating Requirements for Elastomeric Seals
    • GMW 14650
      • Performance Requirements for Exterior Plastic Parts
    • GMW 3414
      • Test Method for Artificial Weathering of Automotive Interior Trim Materials
    • Hyundai MS 210-05
      • Molded Plastic Parts - Interior Use
    • Hyundai MS 300-32
      • Standard Test Method - Woven, Knit
    • IEC 60068-2-5
      • Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
    • IEC 61345
      • UV test for photovoltaic (PV) modules
    • ISO 105-B02
      • Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    • ISO 105-B04
      • Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test
    • ISO 105-B06
      • Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B07
      • Textiles - Tests for Colour Fastness - Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration
    • ISO 105-B10
      • Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation
    • ISO 11341
      • Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation
    • ISO 12040
      • Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light
    • ISO 16474-1
      • Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 16474-2
      • Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
    • ISO 18909
      • Photography - Processed photographic colour films and paper prints - Methods for measuring image stability
    • ISO 18930
      • Imaging materials - Pictorial colour reflection prints - Methods for evaluating image stability under outdoor conditions
    • ISO 18937
      • Imaging materials - Photographic reflection prints - Methods for measuring indoor light stability
    • ISO 29664
      • Plastics - Artificial Weathering Including Acidic Deposition
    • ISO 3917
      • Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
    • ISO 4892-1
      • Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 4892-2
      • Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
    • JASO M346
      • Light-exposure test method by xenon-arc lamp for automotive interior part
    • JASO M351
      • Automotive parts - Accelerated weathering testing method by xenon-arc lamp for exterior parts
    • JIS B 7754
      • Light-exposure and light-and-water-exposure apparatus(xenon arc lamp type)
    • JIS D 0205
      • Test Method of Weatherability for Automotive Parts
    • MIL-STD 810F
      • Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine)
    • MIL-STD 810G
      • Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine)
    • Peugeot Citroen (PSA) D27 1389
      • Paint Coatings Rubbers and Plastics - Artificial Ageing by Weather-Ometer
    • Peugeot Citroen (PSA) D47 1431
      • Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures
    • Renault D27 1911
      • Rubber and Plastic Paint Coatings - Artificial Ageing by Weather Ometer
    • Renault D47 1431
      • Materials and Passenger Compartment Parts Behaviour of the Appearance to Artificial Light at High and Medium Temperatures
    • SAE J1885
      • Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus
    • SAE J1960
      • Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus
    • SAE J2412
      • Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
    • SAE J2413
      • Protocol To Verify Performance of New Xenon Arc Test Apparatus
    • SAE J2527
      • Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus
    • VDA 621-429
      • Tests for automotive coatings - Weathering test for colour fastness
    • VDA 621-430
      • Tests for automotive coatings - Test for resistance to cracking of 2 layer metallic clear coats
    • VDA 75202
      • Automotive interior materials - Colorfastness and ageing test against light at high temperatures: Xenon arc
    • VW PV 1303
      • Non-metallic materials - Lightfastness test for interior parts
    • VW PV 3929
      • Non-Metallic Materials - Weather Ageing in Dry, Hot Climate
    • VW PV 3930
      • Non-Metallic Materials - Weathering in Moist, Hot Climate

  • 下载 +


  • 应用 +


  • 视频 +

    • Ci Weather-Ometer 更换灯管和滤镜

  • 录制网络研讨会 +


    氙灯技术与应用-Atlas网络研讨会-英语


    氙弧和荧光/紫外 - 比较和应用 - Atlas网络研讨会 - 英语


    常见老化试验的设置 - Atlas网络研讨会 - 英语



    不同氙灯老化仪器 - 应用和局限性 - Atlas网络研讨会 - 英语