Xenotest Alpha+ (停产)

Atlas Xenotest Alpha +是一款紧凑型立式旋转架氙灯试验机,曝晒区域为1320平方厘米。 Alpha +提供高质量的氙灯老化测试并且符合绝大多数行业标准。

  • 概述 +


    Xenotest Alpha已停产,不能再订购,请参阅其后续仪器Xenotest 220/440 和Ci3000氙灯老化箱。


    Atlas Xenotest Alpha+是一台带有1320cm2 曝晒面积的旋转架氙灯试验机。使用样品架XENOSENSIV传感器技术,直接在样品水平上测量和控制辐照度和温度。Alpha+遵守许多国际和行业标准,其高度可靠的性能和高辐照能力,它常被研发部门或商业测试服务机构所用。
  • 特点 +


    • 1根2200瓦风冷氙灯灯管
    • 1320 cm2暴露面积
    • 辐照强度最大可达180 W/m2 (3个太阳标准)
    • 彩色触摸屏监控和显示测试参数
    • 直接设定并控制辐照度(300-400纳米)
    • 直接设定并控制黑标温度
    • 直接设定并控制箱体温度
    • 直接设定并控制相对湿度
    • 显示诊断信息
    • 储存10种用户自定义测试方法
    • 预设国际标准测试方法
    • 多语言用户界面
    • 长效的XENOCHROME滤镜模拟室外光线及透过玻璃的日光
    • 样品架XENONSENSIV 300-400纳米,用于测量和控制样品层的辐照度(W/m²)及黑标温度 (°C)
    • 可选温度控制:只控制箱体温度(最高到70 °C),或双控:同时控制箱体温度和黑板温度(最高到130度)
    • 通过风扇控制箱体温度和黑标温度之间的差异
    • 超声波加湿系统用于湿度控制
    • 样品喷淋系统带60升的水箱
    • 可容纳11个样品架的样品旋转架
    • 以辐照量、光照时间或总运行时间来结束试验
    • 先进的自动启动功能
    • 通过记忆卡或RS 232接口输出数据
    • 以太网界面及XenoTouch附件1、2、3(“遥控”、“电邮服务”、“在线监控”)

  • 选项 +


    • XenoCal BST黑标温度计校准器
    • XenoCal WST白标温度计校准器
    • XenoCal BB 300-400辐照传感器校准器
    • XenoCal WB 300-800辐照传感器校准器
    • XenoCal NB 340辐照传感器校准器
    • 可编程旋转模式
  • 配件 +


    • 配有10片窗玻璃滤镜的吸收过滤系统
    • 配有7片红外滤镜的吸收过滤系统
    • “Textile ISO 105” 配件套件
    • “Textile M&S” 配件套件
    • 红外扩展日光滤镜
    • 遮光板45x134 mm(130片)
    • 用于耐光性测试的红外吸收过滤系统AATCC 16(选项H)
    • 把传感器安装到设备上的传感器适配器
    • 一套“特殊”遮光板
    • 一套ISO遮光板,孔径宽度为9、18和27 毫米
    • 一套M&S双槽遮光板(22片)
    • 一套AATCC单槽遮光板
    • 一套M&S单槽遮光板(22片)
    • 适用于蓝标的样品架(用于耐侯测试)
    • 一套“特殊”样品架,适用于尺寸达15 毫米的样品
    • 一套标准样品架,适用于厚达3毫米的样品(11个)
    • 紫外线窗吸收过滤系统
    • XENOCHROME 300滤镜
    • XENOCHROME 320滤镜
    • NXE 2000 HE氙灯灯管
  • 标准 +


    列出的标准和规范可能包含几个备选的测试选项,该仪器在任何列出的标准中至少满足一个选项。标准如有变更,不另行通知。 这可能导致测试技术的改变。经常与负责的标准开发组织检查标准的修订状态。如果不确定仪器是否符合要求,请与当地销售代表联系。

    • AATCC TM16-2004
    • Colorfastness to Light
    • AATCC TM16.3
    • Colorfastness to Light
    • AATCC TM169
    • Weather Resistance of Textiles: Xenon Lamp Exposure
    • ASTM D6695
    • Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    • ASTM G151
    • Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    • ASTM G155
    • Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
    • GME 60292
    • Designation of Colour Fastness and Resistance to Artificial Light
    • GMW 3414
    • Test Method for Artificial Weathering of Automotive Interior Trim Materials
    • IEC 60068-2-5
    • Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
    • ISO 105-B02
    • Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    • ISO 105-B04
    • Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test
    • ISO 105-B06
    • Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B10
    • Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation
    • ISO 12040
    • Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light
    • ISO 16474-2
    • Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
    • ISO 3917
    • Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
    • ISO 4892-1
    • Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 4892-2
    • Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
    • JASO M346
    • Light-exposure test method by xenon-arc lamp for automotive interior part
    • M&S C9
    • Colorfastness to Light
    • M&S C9A
    • Colorfastness to wet light in the presence of alkaline or other chemical residues
    • MIL-STD 810F
    • Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine)
    • SAE J2019
    • Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus
    • SAE J2212
    • Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus
    • VDA 75202
    • Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc
    • VW PV 1303
    • Non-metallic materials - Lightfastness test for interior parts
    • VW PV 3929
    • Non-Metallic Materials - Weather Ageing in Dry, Hot Climate
    • VW PV 3930
    • Non-Metallic Materials - Weathering in Moist, Hot Climate
  • 下载 +

  • 软件 +

  • 应用 +

  • 视频 +

  • 录制网络研讨会 +


    使用 Xenotest 进行耐候性、耐光色牢度和光稳定性测试 - Atlas网络研讨会-英语


    氙灯技术与应用-Atlas网络研讨会-英语


    氙弧和荧光/紫外 - 比较和应用 - Atlas网络研讨会 - 英语


    常见老化试验的设置 - Atlas网络研讨会 - 英语



    不同氙灯老化仪器 - 应用和局限性 - Atlas网络研讨会 - 英语