Ci3000+ Weather-Ometer/ Fade-Ometer

  • 概述 +



    Ci3000 Weather-Ometer和Fade-Ometer采用先进的数字控制系统,代表着在易于使用的实验室气候老化测试仪器中应用数字和光学技术的巨大成就。3000系列得到了众多纺织品、油漆与涂料以及塑料行业生产商的认可,被认为对产品服役寿命预期能够提供精确、可重现且可重复测试结果的专属平台。3000系列获得了CE、UL、CSA、ISO和EN的标准认证。

    该仪器的主要特点包括:旋转转鼓型样品架,使所有样品的均匀度达到最大化;定制设计的喷嘴,提供均匀的样品和机架喷雾;ASTM黑板温度计或ISO/DIN黑标温度计,用于控制和监测样品层的温度,以确保测试的可重复性。
  • 特点 +


    • 4500瓦水冷氙弧灯
    • 总暴露面积2,188 cm2 (339 in2)
    • TFT全彩12寸触摸屏控制面板显示所有测试参数
    • 直接设定并控制黑板温度;不绝缘(BPT)或绝缘(BST)
    • 直接设定并控制相对湿度
    • 直接设定并控制样品箱内空气温度
    • 显示诊断信息
    • 14种工厂预设测试方法(Weather-Ometer);6种工厂预设测试方法(Fade-Ometer)
    • 支持12个自定义程序的空间;亚循环性能
    • 多语言功能(英语、法语、德语、西班牙语、日语、汉语、韩语、土耳其语)
    • 通过以太网或USB接口输出数据。包含U盘
    • 内置Smart DamperTM,减少箱体温度和湿度的测试可变性,并补偿实验室环境条件的变化
    • SmartLight MonitorTM智能化灯光监测系统,验证是否安装了正确的光能监测点
    • Filter combinations可满足所有常见测试方法
    • 进气管除尘过滤器
    • CS-7氙灯冷却系统
    • 试验箱观察窗
    • 全球通用电器配置,适用于各种本地频率、电压和电气要求
    • 满足CE、UL、ISO EN与CSA安全要求
    • 以辐照量和时间为单位自动倒计时功能
    • VibraSonicTMTM 超声波加湿系统
    • 可容纳多种样品类型的Specimen Holders可选
    • 参照氙灯校准
    • 水质指示器

    现在就联系我们联系我们,让我们帮助您从耐候老化测试和流程中获得最大效益。
  • 选项 +


    • 双黑板温度(BPT)和黑标温度(BST)测量/控制,包括BPT和BST传感器
    • 监测第二波长:300-400 纳米、340 纳米或420 纳米,包括光栅、双过滤器外壳和灯管校准
    • WXView (Weather View)数据采集系统
    • 2层样品架 - 60个样品位置
  • 配件 +


    • XenoCal辐照度校准装置用于在样品同一位面独立进行辐照度校准及测量
    • 用于AATCC测试方法16和/或ISO 105 B02的纺织品套件
    • LiquiAirTM独立氙灯冷却系统(顶置式或壁挂式)
    • 可上锁的箱门闭锁机构
    • 适用于特殊汽车内饰和纺织品特殊测试方法的辅助过滤灯罩
  • 标准 +


    列出的标准和规范可能包含几个备选的测试选项,该仪器在任何列出的标准中至少满足一个选项。标准如有变更,不另行通知。 这可能导致测试技术的改变。经常与负责的标准开发组织检查标准的修订状态。如果不确定仪器是否符合要求,请与当地销售代表联系。

    • AATCC TM16-2004
      Colorfastness to Light
    • AATCC TM 16.3 (2014)
    • Colorfastness to Light, Xenon-Arc
    • AATCC TM169
      Weather Resistance of Textiles: Xenon Lamp Exposure
    • ASTM C1442
      Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
    • ASTM D2565
    • Standard Practice for Xeno-Arc Exposure of Plastics Intended for Outdoor Applications
    • ASTM D3424
      Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
    • ASTM D4303
      Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints
    • ASTM D4355
      Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
    • ASTM D4459
      Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
    • ASTM D4798
      Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
    • ASTM D5071
      Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
    • ASTM D6551
      Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
    • ASTM D6695
      Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    • ASTM D7869
      Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
    • ASTM D904
      Standard Practice for Exposure of Adhesive Specimens to Artificial Light
    • ASTM G151
      Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    • ASTM G155
      Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
    • GME 60292
      Designation of Colour Fastness and Resistance to Artificial Light
    • IEC 60068-2-5
      Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
    • ISO 105-B02
      Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    • ISO 105-B04
      Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test
    • ISO 105-B06
      Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B07
      Textiles - Tests for Colour Fastness - Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration
    • ISO 105-B10
      Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation
    • ISO 12040
      Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light
    • ISO 16474-1
      Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 16474-2
      Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
    • ISO 18909
      Photography - Processed photographic colour films and paper prints - Methods for measuring image stability
    • ISO 18930
      Imaging materials - Pictorial colour reflection prints - Methods for evaluating image stability under outdoor conditions
    • ISO 18937
      Imaging materials - Photographic reflection prints - Methods for measuring indoor light stability
    • ISO 3917
      Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
    • ISO 4892-1
      Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 4892-2
      Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
    • JASO M346
      Light-exposure test method by xenon-arc lamp for automotive interior part
    • MIL-STD 810F
      Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine)
    • Peugeot Citroen (PSA) D47 1431
      Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures
    • SAE J2412
      Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
    • SAE J2527
      Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus
    • VDA 75202
      Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc
    • VW PV 1303
      Non-metallic materials - Lightfastness test for interior parts
    • VW PV 3929
      Non-Metallic Materials - Weather Ageing in Dry, Hot Climate
    • VW PV 3930
      Non-Metallic Materials - Weathering in Moist, Hot Climate
  • 下载 +

  • 应用 +

  • 视频 +