Xenotest Beta+

  • 概述 +



    Xenotest Beta+是一台带有4000cm2暴露面积的紧凑型独立式旋转架氙灯老化仪。它带有完整的参数控制。使用样品架XENOSENSIV传感器技术,直接在样品水平上测量和控制辐照度和温度。Beta+符合绝大多数行业标准。由于其巨大的试验箱和高度可靠的性能,它是较大容量或较大样品量的理想选择。
  • 特点 +


    • 3根2200瓦风冷氙灯灯管
    • 4000 cm2暴露面积
    • 辐照强度最大可达120 W/m2 (2个太阳标准)
    • 彩色触摸屏监控和显示测试参数
    • 直接设定并控制辐照度(300-400纳米)
    • 直接设定并控制黑标温度
    • 直接设定并控制箱体温度
    • 直接设定并控制相对湿度
    • 显示诊断信息
    • 储存10种用户自定义测试方法
    • 预设国际标准测试方法
    • 多语言用户界面
    • 长效XENOCHROME滤镜模拟户外日光及透过玻璃的日光
    • 样品架XENONSENSIV 300-400纳米,用于测量和控制样品层的辐照度(W/m2)及黑标温度 (°C)
    • 可选温度控制:只控制箱体温度(最高到70 °C),或双控:同时控制箱体温度和黑板温度(最高到130度)
    • 通过风扇控制箱体温度和黑标温度之间的差异
    • 超声波加湿系统用于湿度控制
    • 样品喷淋系统带60升的水箱
    • 特殊紫外线玻璃制成的滤镜套筒
    • 以曝晒量、光照时间或总运行时间来结束试验
    • 先进的自动启动功能
    • 通过记忆卡或RS 232接口输出数据
    • 以太网界面连接内部计算机网络,及XenoTouch附件1、2、3的使用(遥控、电邮服务、在线监控)

  • 选项 +


    • XenoCal WST白标温度计
    • XenoCal BST黑标温度计
    • XenoCal BB 300-400辐射传感器
    • XenoCal NB 340辐射传感器
  • 配件 +


    • 适用于窄(45 毫米)样品架的适配器
    • 适用于宽(80 毫米)样品架的适配器
    • 样品背衬80 x320 mm(100片)
    • 一套NXE 2200氙灯灯管(3根)
    • 一套2段式“特殊”遮光板
    • 一套孔径宽度为9、18和27 毫米的“标准”遮光板(每种16片)
    • 一套备用件
    • 适用于蓝标羊毛的特殊样品架(用于耐侯测试)
    • 适用于蓝标羊毛的特殊样品架(用于耐侯测试),包括窄样品架
    • 适合特殊适配器的标准样品架
    • 一套2段式“特殊”样品架
    • 一套3段式“特殊”样品架
    • 一套标准样品架,适用于厚达10 毫米的样品(16个)
    • XENOCHROME 300(紫外截至点在300 纳米的滤镜,模拟户外测试)
    • XENOCHROME 320(紫外截至点在320 纳米的滤镜,模拟透过玻璃窗的光照测试)
  • 标准 +


    列出的标准和规范可能包含几个备选的测试选项,该仪器在任何列出的标准中至少满足一个选项。标准如有变更,不另行通知。 这可能导致测试技术的改变。经常与负责的标准开发组织检查标准的修订状态。如果不确定仪器是否符合要求,请与当地销售代表联系。

    • AATCC TM16-1998
      Colorfastness to Light
    • AATCC TM16-2004
      Colorfastness to Light
    • AATCC TM169
      Weather Resistance of Textiles: Xenon Lamp Exposure
    • ASTM D6695
      Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    • ASTM G151
      Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    • ASTM G155
      Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
    • GME 60292
      Designation of Colour Fastness and Resistance to Artificial Light
    • GMW 3414
      Test Method for Artificial Weathering of Automotive Interior Trim Materials
    • IEC 60068-2-5
      Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
    • ISO 105-B02
      Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    • ISO 105-B04
      Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test
    • ISO 105-B06
      Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B10
      new standardTextiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation
    • ISO 12040
      Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light
    • ISO 16474-2
      Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
    • ISO 3917
      Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
    • ISO 4892-1
      Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 4892-2
      Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
    • JASO M346
      Light-exposure test method by xenon-arc lamp for automotive interior part
    • MIL-STD 810F
      Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine)
    • RAL-GZ 716
      Plastic Windows - Quality Control
    • SAE J2019
      Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus
    • SAE J2212
      Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus
    • VDA 621-429
      Tests for automotive coatings - Weathering test for colour fastness
    • VDA 621-430
      Tests for automotive coatings - Test for resistance to cracking of 2 layer metallic clear coats
    • VDA 75202
      Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc
    • VW PV 1303
      Non-metallic materials - Lightfastness test for interior parts
    • VW PV 3929
      Non-Metallic Materials - Weather Ageing in Dry, Hot Climate
    • VW PV 3930
      Non-Metallic Materials - Weathering in Moist, Hot Climate
  • 下载 +

  • 软件 +

  • 应用 +

  • 视频 +