SUNTEST XXL+

SUNTEST XXL -大型氙灯耐候老化试验箱

 
  • 概述 +


    Atlas SUNTEST XXL+是一款大型氙气灯耐候性耐光老化仪,符合各种ISO、ASTM和ICH行业标准。其水平面3000 cm2的暴露区域是3D样品测试的优先选择。


    SUNTEST XXL+被用于检测材料和产品因日光、温度和水分而引起的短时间内的特性改变。产品在室外或室内发生的变化,如褪色、变黄或强度损失,可能需要几个月或几年的时间,而在一台SUNTEST测试仪器中往往只需要几周就能进行模拟。

    优点:
    • 符合CIE85要求的逼真日光辐射模拟
    • 可选滤镜,用于模拟透过窗玻璃的阳光等。
    • 用于测试3D样品的优选试验箱设计
    • 易于使用的触摸屏用户界面,有13种语言可选
    • 方便快速启动设置的预设标准
    • 带有开孔方便连接额外的外部传感器
    • 符合ISO 4892-1标准的黑标温度传感器(BST)
    • 满足不同测试需求的自动辐照度控制
  • 特点 +


    • 尺寸90 x 91 x 172 cm
    • 暴露面积79 x 39 cm (3000 cm2)
    • 3根风冷1700瓦氙灯灯管
    • 易于使用的触摸屏用户界面,有13种语言可选
    • 直接设定并控制辐照强度(300-400 nm或340 nm)
    • 直接设定并控制黑标温度 (BST)或黑板温度(BPT)
    • 直接设定并控制箱体温度 (CHT)
    • 直接控制每一个测试参数的容差范围,已优化测试控制
    • 显示诊断信息
    • 10项可编程测试,每项包含多达12个阶段
    • 预置聚合物和涂层标准方便快速调用
    • 用于34个标准或多个3D样品的水平3000 cm²暴露面积
    • 符合CIE85要求的逼真日光模拟
    • 配有铝反射器、灯管接头和滤镜插槽的灯盒
    • 带红外反射涂层的外滤镜
    • 辐照控制范围30-65 W/m2 (300-400 nm); 0,26-0,62 W/m2 (340 nm)
    • 测量并控制CHT:上限70 °C(亮周期)
    • 测量并控制BST或BPT:上限100 °C(亮周期)
    • 符合ISO 4892-1的BST传感器设计
    • 可选择通过CHT或双控进行温度控制:同时控制CHT和BST(BPT)
    • CHT与BST (BPT)之间的控制温差
    • 高频振荡加湿系统用于湿度控制
    • 样品喷淋系统带60升的水箱
    • 倾斜5度的样品测试平面,方便喷淋水导流
    • 约30 x 25 mm的进入端口,连接试验箱内部传感器
    • 以曝晒量、光照时间或总运行时间来结束试验
    • 先进的自动启动功能
    • 通过记忆卡或RS 232接口输出数据
    • 存储工具数据的内部存储芯片
    • 通过以太网界面连接网络参见可选XenoTouch软件附件1、2、3(“遥控”、“电邮服务”、“在线监控”)
  • 选项 +


    • 光能监测点 420 nm
    • BST/BPT交换套件
    • 用于降低测试温度的灯盒
  • 配件 +


    • 日光滤镜
    • 窗玻璃滤镜
    • 日光ID 65滤镜
    • BPT传感器
    • 样品架和遮挡板
    • ICH-D10/20/30粉末样品架,用于1-3 毫米的粉末样品(药品)的准备
    • 暴露面积740 x 368 mm的滑动样品台
    • 把3个排风口和实验室通风系统连接的排风罩
    • SunCal BB 300-400 BST传感器,用于波长范围300-400 nm的以W/m²为单位的辐照度校准和以°C为单位的黑标温度计BST校准
    • XenoTouch软件附带“遥控”、“电邮服务”、“在线监控”
  • 软件 +

  • 下载 +

  • 应用 +

  • 标准 +


    列出的标准和规范可能包含几个备选的测试选项,该仪器在任何列出的标准中至少满足一个选项。标准如有变更,不另行通知。 这可能导致测试技术的改变。经常与负责的标准开发组织检查标准的修订状态。如果不确定仪器是否符合要求,请与当地销售代表联系。

    • AATCC TM169
      Weather Resistance of Textiles: Xenon Lamp Exposure
    • ASTM C1442
      Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
    • ASTM C1501
      Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
    • ASTM D4355
      Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
    • ASTM D6695
      Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    • ASTM G151
      Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    • ASTM G155
      Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
    • EOTA TR010
      Exposure procedure for artificial weathering
    • EPA/ASTM E896
      Standard Test Method for Conducting Aqueous Direct Photolysis Tests
    • GB/T 1865
      Paints and varnishes--Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon- arc radiation
    • GB/T 8427
      Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test
    • GB/T 13492
      Finishes for automobiles
    • GB/T 16422
      Plastics -- Methods of exposure to laboratory light sources -Part 2: Xenon-arc lamps
    • IEC 60068-2-5
      Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
    • ISO 105-B06
      Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B10
      Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation
    • ISO 4892-1
      Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 4892-2
      Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
    • ISO 10977
      Photography -- Processed photographic colour films and paper prints -- Methods for measuring image stability
    • ISO 11341
      Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation
    • ISO 11431
      Building construction -- Jointing products -- Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
    • ISO 11979-5
      Ophthalmic implants -- Intraocular lenses -- Part 5: Biocompatibility
    • ISO 16474-2
      Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
    • MIL-STD 810G
      Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine)
    • VW PV 3930
      Non-Metallic Materials - Weathering in Moist, Hot Climate
  • 视频 +

  • 录制网络研讨会 +


    Essais de résistance aux intempéries, de résistance à la lumière et de photostabilité avec SUNTEST - Séminaire en ligne Atlas – Anglais


    氙灯技术与应用-Atlas网络研讨会-英语

    氙弧和荧光/紫外 - 比较和应用 - Atlas网络研讨会 - 英语


    常见老化试验的设置 - Atlas网络研讨会 - 英语



    不同氙灯老化仪器 - 应用和局限性 - Atlas网络研讨会 - 英语



    ICH和相关指南- Atlas SUNTEST®仪器中的药物光稳定性测试 - Atlas网络研讨会 - 英语