Ci4400 Weather-Ometer

  • 概述 +



    100多年来,Atlas改变了耐候性测试这门科学。新Atlas Ci4400 Weather-Ometer®是我们更先进的仪器,不但提供简单易用的操作、优异的均匀度,较大的箱体容量,并兼顾时尚的设计,给您带来值得信赖的价值和性能体验。凭借其简单易用的触摸屏界面和符合人机工程学原理的特点,这台先进设备又更上一层楼。

    优异的可重复性和可再现性

    气流、辐照和控制系统的设计和工程创新大大降低了关键测试参数的可变性。因此,Ci4400达到了全新水平的温度、湿度和光照均匀度。
  • 特点 +


    • 6500瓦水冷氙灯系统
    • 总暴露面积达7,300 cm2 (1,130 in2)
    • 配可拆卸的三层转鼓式样品架
    • TFT全彩15寸触摸屏用户界面显示所有测试参数
    • 直接设定并控制辐照度:340纳米、420纳米或300-400纳米
    • 直接设定并控制BPT/BST
    • 直接设定并控制相对湿度
    • 直接设定并控制箱内空气温度
    • 显示诊断信息
    • 14种工厂预置测试方法
    • 支持12个自定义程序的空间;亚循环性能
    • 多语言功能(汉语、捷克语、英语、法语、德语、日语、韩语、波兰语、俄语、西班牙语、土耳其语)
    • 通过以太网或USB接口输出数据。包含U盘
    • SmartLight MonitorTM智能化灯光监测系统,能验证是否安装了正确的光能监测点
    • 样品前部喷淋和背部喷淋
    • 滤镜组合以满足所有测试方法
    • 进气管过滤器
    • CS-9氙灯冷却系统
    • 水质监控及自动报警
    • 测试状态指示灯
    • 自带小型折叠式台面方便用户安置样品、试验记录本、耗材或电脑
    • 箱门配可锁的闭锁系统
    • 充足箱体进入空间以方便日常维护
    • 使用校准氙灯或Xenocal校准器校验设备
    • 试验箱观察窗
    • 全球通用电器配置,适用于各种本地频率、电压和电气要求
    • 满足CE、UL、ISO、EN与CSA安全要求
    • 以辐照量和时间为单位自动倒计时功能
    • VibraSonicTMTM加湿系统
    现在就联系我们联系我们,让我们帮助您从耐候老化测试和流程中获得更大效益。
  • Sealed Lamp +


    Weather-Ometer® Ci4000 和 Ci4400 变得更易于使用和维护。

    新的 6500 瓦 Atlas Sealed Lamp 可用于两种型号,并带有两种过滤器组合。 每个密封的 Atlas Sealed Lamp 都是相应灯/滤光片组件的直接替代品,具有相同的 1200 光小时保证。

  • 选项 +


    • 双黑板温度(BPT)和黑标温度(BST)测量/控制,包括BPT和BST传感器
    • 监测第二波长:300-400 纳米、340 纳米或420 纳米
    • S3T 非接触式样品表面温度测量系统
    • WXView II数据采集系统-基于Web的应用程序,允许用户安全地访问连接到其公司网络的仪器,下载存档文件和其他功能
  • 配件 +


    • 样品位面独立辐照度校准及测量的XenoCal辐照度校准装置
    • 满足特殊测试要求的辅助滤镜灯罩
    • 可容纳多种样品类型的样品架可选
    • LiquiAirTM独立氙灯冷却系统(顶置式或壁挂式可选)
  • 标准 +


    列出的标准和规范可能包含几个备选的测试选项,该仪器在任何列出的标准中至少满足一个选项。标准如有变更,不另行通知。 这可能导致测试技术的改变。经常与负责的标准开发组织检查标准的修订状态。如果不确定仪器是否符合要求,请与当地销售代表联系。

    • AATCC TM16.3
    • Colorfastness to Light: Xenon-Arc
    • AATCC TM169
    • Weather Resistance of Textiles: Xenon Lamp Exposure
    • AATCC TM16E
    • Colorfastness to Light
    • ASTM C1257
    • Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
    • ASTM C1442
    • Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
    • ASTM C1501
    • Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
    • ASTM C1519
    • Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
    • ASTM C732
    • Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
    • ASTM C734
    • Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
    • ASTM C793
    • Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
    • ASTM D1148
    • Standard Test Method for Rubber Deterioration/Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
    • ASTM D1670
    • Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
    • ASTM D2565
    • Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
    • ASTM D3424
    • Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
    • ASTM D3451
    • Standard Guide for Testing Coating Powders and Powder Coatings
    • ASTM D4101
    • Standard Specification for Polypropylene Injection and Extrusion Materials
    • ASTM D4303
    • Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints
    • ASTM D4355
    • Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
    • ASTM D4434
    • Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
    • ASTM D4459
    • Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
    • ASTM D4637
    • Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane
    • ASTM D4798
    • Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
    • ASTM D4811
    • Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
    • ASTM D5010
    • Standard Guide for Testing Printing Inks and Related Materials
    • ASTM D5019
    • Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
    • ASTM D5071
    • Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
    • ASTM D5383
    • Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists
    • ASTM D5398
    • Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
    • ASTM D5819
    • Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
    • ASTM D6083
    • Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
    • ASTM D6551
    • Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
    • ASTM D6577
    • Standard Guide for Testing Industrial Protective Coatings
    • ASTM D6662
    • Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
    • ASTM D6695
    • Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    • ASTM D6878
    • Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
    • ASTM D750
    • Standard Test Method for Rubber Deterioration Using Artificial Weathering Apparatus
    • ASTM D7869
    • Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
    • ASTM D904
    • Standard Practice for Exposure of Adhesive Specimens to Artificial Light
    • ASTM F1164
    • Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
    • ASTM F1515
    • Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
    • ASTM F2366
    • Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon-Arc Light Apparatus
    • ASTM G151
    • Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    • ASTM G155
    • Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
    • FLTM BO 116-01
    • Resistance to interior weathering
    • GB/T 10485
    • Road vehicles- Lighting and light-signaling devices- Environmental endurance
    • GB/T 14522
    • Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products
    • GB/T 16259
    • Test method for accelerated weathering of building materials
    • GB/T 16422
    • Plastics -- Methods of exposure to laboratory light sources -Part 2: Xenon-arc lamps
    • GB/T 16991
    • Textiles--Test for color fastness--Color fastness and ageing to artificial light at high temperatures: Xenon-arc
    • GB/T 1865
    • Paints and varnishes--Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon- arc radiation
    • GB/T 18833
    • Retro-reflective sheeting for road traffic signs
    • GB/T 29061
    • Performance films for glass in buildings
    • GB/T 32088
    • Accelerated weathering test methods of automotive nonmetallic components and materials using a xenon-arc apparatus
    • GB/T 3511
    • Rubber, vulcanized- Test method for resistance to artificial weathering (xenon-arc)
    • GB/T 5137
    • Automotive safety glass test method
    • GB/T 6151
    • Textiles-Tests for color fastness-General principle of testing
    • GB/T 8427
    • Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test
    • GB/T 8430
    • Textiles - Tests for color fastness to artificial weathering - Xenon-arc fading lamp test
    • GM 9125P
    • Procedures for Laboratory Accelerated Exposure of Automotive Materials
    • GME 60292
    • Designation of Colour Fastness and Resistance to Artificial Light
    • GMW 14162
    • Colorfastness to Artificial Weathering
    • GMW 14170
    • Coating Requirements for Elastomeric Seals
    • GMW 14650
    • Performance Requirements for Exterior Plastic Parts
    • GMW 3414
    • Test Method for Artificial Weathering of Automotive Interior Trim Materials
    • Hyundai MS 210-05
    • Molded Plastic Parts - Interior Use
    • Hyundai MS 300-32
    • Standard Test Method - Woven, Knit
    • IEC 60068-2-5
    • Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
    • IEC 61345
    • UV test for photovoltaic (PV) modules
    • ISO 105-B02
    • Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    • ISO 105-B04
    • Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test
    • ISO 105-B06
    • Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B07
    • Textiles - Tests for Colour Fastness - Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration
    • ISO 105-B10
    • Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation
    • ISO 11341
    • Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation
    • ISO 12040
    • Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light
    • ISO 16474-1
    • Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 16474-2
    • Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
    • ISO 18909
    • Photography - Processed photographic colour films and paper prints - Methods for measuring image stability
    • ISO 18930
    • Imaging materials - Pictorial colour reflection prints - Methods for evaluating image stability under outdoor conditions
    • ISO 18937
    • Imaging materials - Photographic reflection prints - Methods for measuring indoor light stability
    • ISO 29664
    • Plastics - Artificial Weathering Including Acidic Deposition
    • ISO 3917
    • Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
    • ISO 4892-1
    • Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 4892-2
    • Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
    • JASO M346
    • Light-exposure test method by xenon-arc lamp for automotive interior part
    • JASO M351
    • Automotive parts - Accelerated weathering testing method by xenon-arc lamp for exterior parts
    • JIS B 7754
    • Light-exposure and light-and-water-exposure apparatus(xenon arc lamp type)
    • JIS D 0205
    • Test Method of Weatherability for Automotive Parts
    • MIL-STD 810F
    • Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine)
    • MIL-STD 810G
    • Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine)
    • Peugeot Citroen (PSA) D27 1389
    • Paint Coatings Rubbers and Plastics - Artificial Ageing by Weather-Ometer
    • Peugeot Citroen (PSA) D47 1431
    • Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures
    • Renault D27 1911
    • Rubber and Plastic Paint Coatings - Artificial Ageing by Weather Ometer
    • Renault D47 1431
    • Materials and Passenger Compartment Parts Behaviour of the Appearance to Artificial Light at High and Medium Temperatures
    • SAE J1885
    • Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus
    • SAE J1960
    • Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus
    • SAE J2412
    • Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
    • SAE J2413
    • Protocol To Verify Performance of New Xenon Arc Test Apparatus
    • SAE J2527
    • Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus
    • VDA 621-429
    • Tests for automotive coatings - Weathering test for colour fastness
    • VDA 621-430
    • Tests for automotive coatings - Test for resistance to cracking of 2 layer metallic clear coats
    • VDA 75202
    • Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc
    • VW PV 1303
    • Non-metallic materials - Lightfastness test for interior parts
    • VW PV 3929
    • Non-Metallic Materials - Weather Ageing in Dry, Hot Climate
    • VW PV 3930
    • Non-Metallic Materials - Weathering in Moist, Hot Climate
  • 下载 +

  • 应用 +

  • 软件 +


    XenoSoft是一种分析软件,用于由Atlas XenoCal校准传感器测量结果的评估和图形显示。
  • 视频 +

  • 录制网络研讨会 +


    氙灯技术与应用-Atlas网络研讨会-英语


    氙弧和荧光/紫外 - 比较和应用 - Atlas网络研讨会 - 英语


    常见老化试验的设置 - Atlas网络研讨会 - 英语



    不同氙灯老化仪器 - 应用和局限性 - Atlas网络研讨会 - 英语